Turn on the device by pressing the switch on the back: 5 windows will appear in succession:

1/ Set language, unit, region, and time.

2/ Log in to the account : ID: immunec    and      Password: linkor (in lowercase)

3/ Connect to the internet: Wi-Fi or Ethernet cable 

4/ An automatic update will start after a few minutes: “Accept.”
    Once the update is complete, the device will restart.

5/ NFC Cards : Each reagent box contains an NFC card with information about the batch and calibration curve.
      Before using a new reagent kit, scan  the 3 NFC cards.
      See above video:  Reagents Description 

     The Linkor is now ready for use.

Integrated on thermal paper (included)

Installing the printing paper

- Open the thermal printer housing located on the right side of the analyzer. Pull the cover upward.

- Simply place the roll of printing paper in the paper tray.

Make sure that the unwinding side of the printing paper is facing down.

- Allow the printing paper to protrude slightly from the tray and close the cover.

Printing: Select the desired test report and click on the print button at the top right. 

On A4 paper 

     In the [Settings] menu, click on “Print Connection.”

     Click on the “Connect Printer” button to access the [Printer Connection] page.

     The [Printing Device] refers to the printer that can be detected nearby via Wi-Fi or on your local network.

Refer to the User Manual for more details on the procedure.

PDF export 

 - To USB: Plug a USB flash drive into the back of the machine (USB port).          
   Select the desired test report and click the export button at the top right. 

- To a smartphone or computer: the PC or phone and Linkor must be connected to the same network.

     In [Settings ], click on  ‘Report display address’.

    The Linkor IP address will be displayed.

    Enter this IP address into the browser on your phone or PC.

Refer to the User Manual for more details on the procedure.