Turn on the device by pressing the switch on the back: 5 windows will appear in succession:

 1/ Select the desired language.

2/ Set the time and date.

3/ Connect to the internet: Wi-Fi or Ethernet cable 

4/ Log in to the account (in lowercase): ID: immunec    and      Password: linkor

5/ An automatic update (mandatory) will start: ‘Accept’.
   Once the update is complete, the device will restart.

     The Linkor is now ready for use.

Integrated printing on thermal paper  (included)

 Installing the printing paper

 -  Open the thermal printer housing located on the right side of the analyser. Pull the cover upwards.

 - Simply place the roll of printing paper in the paper tray.
    Ensure that the heat-sensitive side of the printing paper is facing upwards.

 - Allow the printing paper to protrude slightly from the tray and close the cover.

 Printing: Select the desired test report and click on the print button at the top right. 

A4 paper printing 

- In the [Settings] menu, click on ‘Print connection’.

- Click on the ‘Connect printer’ button to access the [Printer connection] page.

- The [Printing Device] refers to the printer that can be detected nearby via Wi-Fi or on your local network.

Refer to the User Manual for more details on the procedure.

PDF export 

- If Linkor is connected via Ethernet : you can retrieve reports directly on your PC.

- If Linkor is connected via Wi-Fi : you can retrieve reports directly via USB stick.

- To view/download reports from: a smartphone/tablet/PC/laptop:

In [Settings ], click on  ‘Report display address’.

Enter the IP address displayed in your device's browser to access the reports.

Note: the PC (or device) and the analyser must be connected to the same network.

Refer to the User Manual for more details on the procedure.